Kenwood Basic C 2: Unterschied zwischen den Versionen
(→Bilder) |
|||
| Zeile 5: | Zeile 5: | ||
* Hersteller: Trio-Kenwood Corporation | * Hersteller: Trio-Kenwood Corporation | ||
* Modell: Basic C2 | * Modell: Basic C2 | ||
| − | * Baujahre: | + | * Baujahre: Mitte der 80-er |
* Hergestellt in: Japan | * Hergestellt in: Japan | ||
* Farbe: schwarz | * Farbe: schwarz | ||
| Zeile 31: | Zeile 31: | ||
'''Technische Daten''' | '''Technische Daten''' | ||
| + | * Eingangsempfinglichkeit, Impedanz: | ||
| + | Input Sensitivity/Impedance/Signal-to-Noise Ratio (IHF A Curve) | ||
| + | Phono MM...........................................2.5 mV/47 k, 100 k ohms | ||
| + | Phono MC...........................................200 uV/10 ohms, 30 ohms, 100 ohms | ||
| + | CD, AUX, TUNER, TAPE...............................150 mV/47 k ohms | ||
| + | |||
| + | * Ausgangspannung, Impedanz: | ||
| + | Output Voltage & Impedance | ||
| + | TAPE REC...........................................150 mV, 220 ohms | ||
| + | PRE OUT...........................................1000 mV, 100 ohms | ||
| + | |||
* Frequenzgang: | * Frequenzgang: | ||
| + | Frequency Response | ||
| + | Phono MM & MC......................................20 Hz - 20 kHz -0.3 dB | ||
| + | CD, AUX, TUNER,TAPE.................................1 Hz - 350 kHz (-3 dB) | ||
| + | |||
| + | Transient Response | ||
| + | Rise Time............ ............................1.0 us | ||
| + | |||
| + | |||
* Klirrfaktor: | * Klirrfaktor: | ||
| + | Total Harmonic Distortion | ||
| + | CD, AUX, TUNER, TAPE | ||
| + | 20 Hz~20 kHz...................................... 0.001 % at 1 V Output | ||
| + | Phono MM & MC | ||
| + | 20 Hz~20 kHz........................................0.002% | ||
| + | |||
| + | |||
| + | Maximum Input Voltage for Phono MM......200 mV, T.H.D. 0.002% | ||
| + | Maximum Input Voltage for Phono MC.......5 mV, T.H.D. 0.002% | ||
| + | |||
| + | |||
* Signalrauschabstand: | * Signalrauschabstand: | ||
| + | Signal-to-Noise Ratio Unweighted at 50 mW (DIN) | ||
| + | Phono MM & MC.......................................73 dB | ||
| + | CD, AUX, TUNER, TAPE................................79 dB | ||
| + | |||
| + | Signal-to-Noise Ratio (IHF A Curve) | ||
| + | Phono MM............................................88 dB | ||
| + | Phono MC............................................70 dB, 250 uV Input short | ||
| + | CD, AUX, TUNER, TAPE...............................110 dB | ||
| + | |||
| + | |||
* Stereokanaltrennung: | * Stereokanaltrennung: | ||
* Klangregelung | * Klangregelung | ||
| Zeile 39: | Zeile 79: | ||
** Höhen: 3kHz/6kHz/off +/-10db | ** Höhen: 3kHz/6kHz/off +/-10db | ||
* Loudness: schaltbar | * Loudness: schaltbar | ||
| + | Loudness Control | ||
| + | (at VOLUME -30 dB).....................................100 Hz, 6 dB | ||
| + | (at VOLUME -40 dB).....................................100 Hz, 9 dB | ||
| + | |||
* High Filter: 8kHz | * High Filter: 8kHz | ||
| − | * | + | * Subsonic Filter: 18Hz, 12 dB/Octave |
| + | * Low Filter: 40Hz, 58Hz, 12 dB/Octave | ||
* Mute: schaltbar (Kopfhörer bleibt an) | * Mute: schaltbar (Kopfhörer bleibt an) | ||
* Direct/Line-Straight: ja, wenn Klangregler auf "off" gestellt werden | * Direct/Line-Straight: ja, wenn Klangregler auf "off" gestellt werden | ||
Version vom 3. Dezember 2007, 00:58 Uhr
Daten
Allgemein
- Hersteller: Trio-Kenwood Corporation
- Modell: Basic C2
- Baujahre: Mitte der 80-er
- Hergestellt in: Japan
- Farbe: schwarz
- Typ: Analog
- Fernbedienung: -
- Leistungsaufnahme: 12W
- Abmessungen: 44cm x 32cm x 8cm
- Gewicht: 4,7kg
- Neupreis ca.:
Anschlüsse
- Anzahl der Eingänge: 7 chinch
- Phono
- CD
- Tuner
- AUX1
- AUX2
- Tape1
- Tape2
- Anzahl der Ausgänge: 3 chinch
- Tape1, Tape2
- Output
Technische Daten
- Eingangsempfinglichkeit, Impedanz:
Input Sensitivity/Impedance/Signal-to-Noise Ratio (IHF A Curve) Phono MM...........................................2.5 mV/47 k, 100 k ohms Phono MC...........................................200 uV/10 ohms, 30 ohms, 100 ohms CD, AUX, TUNER, TAPE...............................150 mV/47 k ohms
- Ausgangspannung, Impedanz:
Output Voltage & Impedance TAPE REC...........................................150 mV, 220 ohms PRE OUT...........................................1000 mV, 100 ohms
- Frequenzgang:
Frequency Response Phono MM & MC......................................20 Hz - 20 kHz -0.3 dB CD, AUX, TUNER,TAPE.................................1 Hz - 350 kHz (-3 dB)
Transient Response Rise Time............ ............................1.0 us
- Klirrfaktor:
Total Harmonic Distortion CD, AUX, TUNER, TAPE 20 Hz~20 kHz...................................... 0.001 % at 1 V Output Phono MM & MC 20 Hz~20 kHz........................................0.002%
Maximum Input Voltage for Phono MM......200 mV, T.H.D. 0.002%
Maximum Input Voltage for Phono MC.......5 mV, T.H.D. 0.002%
- Signalrauschabstand:
Signal-to-Noise Ratio Unweighted at 50 mW (DIN) Phono MM & MC.......................................73 dB CD, AUX, TUNER, TAPE................................79 dB
Signal-to-Noise Ratio (IHF A Curve) Phono MM............................................88 dB Phono MC............................................70 dB, 250 uV Input short CD, AUX, TUNER, TAPE...............................110 dB
- Stereokanaltrennung:
- Klangregelung
- Bass: 200/400Hz/off +/-10db
- Höhen: 3kHz/6kHz/off +/-10db
- Loudness: schaltbar
Loudness Control (at VOLUME -30 dB).....................................100 Hz, 6 dB (at VOLUME -40 dB).....................................100 Hz, 9 dB
- High Filter: 8kHz
- Subsonic Filter: 18Hz, 12 dB/Octave
- Low Filter: 40Hz, 58Hz, 12 dB/Octave
- Mute: schaltbar (Kopfhörer bleibt an)
- Direct/Line-Straight: ja, wenn Klangregler auf "off" gestellt werden
Besondere Ausstattungen
- High-Gain FET Phonoeingang mit 2xMM/3xMC-Anpassung
- zweistufige "super-coupled" Lautstärkeregelung
- Klangregelung verfärbungsfrei gegengekoppelt
Bemerkungen
Weitere Modelle der gleichen Serie:
Bilder
