Arcam A90: Unterschied zwischen den Versionen
Passat (Diskussion | Beiträge) K (nicht vorlagenkonform) |
(Entspricht inhaltlich den übrigen hw-Seiten, daher Baustein raus, lieber Passat, vielleicht auch mal selbst an die Vorlage anpassen ;-). Habe einige Beiträge gemacht, mich nervt dies Baustein setzen.) |
||
| Zeile 1: | Zeile 1: | ||
| − | |||
'''Arcam Diva A90 integrated amplifier'''<br> | '''Arcam Diva A90 integrated amplifier'''<br> | ||
| − | + | General:<br> | |
| − | + | Size w/d/h mm. inc. feet 435x340x100<br> | |
| − | + | Weight (net) 9kg<br> | |
| − | |||
| − | |||
Inputs:<br> | Inputs:<br> | ||
| Zeile 14: | Zeile 11: | ||
Input sensitivity for rated 8 ohms power output 700mv<br> | Input sensitivity for rated 8 ohms power output 700mv<br> | ||
Input impedance 22kΩ<br> | Input impedance 22kΩ<br> | ||
| + | |||
| + | Technical data | ||
| + | |||
| + | Continuous power output per channel:<br> | ||
| + | Both channels driven 8Ω, 20hz-20khz 90w<br> | ||
| + | Single channel 4Ω, 1khz 150w<br> | ||
| + | |||
| + | Distortion 8Ω, 80% power, 1khz 0.008% | ||
Signal to noise ratio* 105db<br> | Signal to noise ratio* 105db<br> | ||
| Zeile 21: | Zeile 26: | ||
Output impedance <50Ω<br> | Output impedance <50Ω<br> | ||
Power consumption (maximum) 800va<br> | Power consumption (maximum) 800va<br> | ||
| − | |||
| − | |||
| − | |||
| − | |||
Version vom 11. Oktober 2020, 13:34 Uhr
Arcam Diva A90 integrated amplifier
General:
Size w/d/h mm. inc. feet 435x340x100
Weight (net) 9kg
Inputs:
Phono cartridge input ( where fitted) mm/mc optional extra
Input sensitivity 2.5mv 250uv
Line and tape inputs
Input sensitivity for rated 8 ohms power output 700mv
Input impedance 22kΩ
Technical data
Continuous power output per channel:
Both channels driven 8Ω, 20hz-20khz 90w
Single channel 4Ω, 1khz 150w
Distortion 8Ω, 80% power, 1khz 0.008%
Signal to noise ratio* 105db
Tone controls, max boost/cut +/-12db
Preamplifier outputs
Nominal output level 700mv
Output impedance <50Ω
Power consumption (maximum) 800va